Trying to organize the tutorials from easiest (top) to hardest (bottom)
Difficult Follows Colors
EasyNormalHard at firstUndefinedDifficulty VariesFirst you need to get a bridge, right click the doodad and convert it to terrain or include doodad tiles .Collapse Box
Bridge RailingsCollapse Box
Step 1Take These Tiles and put them together then your finished 0_o that was quick
Finished Product
Small BridgesCollapse Box
Step 1You have to move bridge u shown here use the 2 tiles at the top as reference to where to shrink it.
Step 2Fill in the rest of the tiles then you copy and paste the missing segment.
Step 3Tips%uFFFDThis type of bridge is mainly for looks since its smaller and uses less space when you want to make some broken bridges%uFFFDOnly the smallest of units can go through it and even then they have a very tough time%uFFFDIts good for when you want to save space on your map but of course its hard to maneuver %uFFFD A good alternative then making collided bridges if your worried about blockiness but if you can do collided right, collided is a better choice Extended BridgesCollapse Box
Step 1First step take this little 2 title and move it to the side doesn't matter if its up or down this is important as a first step as his helps you to remember where to move the rest of the bridge.
Step 2Fill in the blocks as if it was a regular bridge but moved diagonally as shown here.
Step 3Fill in the tiles if it was a regular bridge but move it diagonally.
Step 4Use this as a reference for dirt bridges since you need to extend it for better looks.
DocksCollapse Box
Step 1
Make the bridge and use the blends i have right here
Step 2
Use the blend I've displayed at then end to make it blend better.
Step 3
When your done it should look like this
High Dirt/Ruins Bridge(s)Collapse Box
Step 1First you need to get that little tile in there, remember this as i reference this throughout my tutorial.
Step 2When you done with that, take the bottom of the bridge and apply it the rest of the similar tiles except the top part that blends with the water, yeah this too its important for some of my peices lol.
Step 3 (High Dirt/Ruins)Now you have to choose either ruin bridge or high dirt, for high dirt simply fill in any bridge with high dirt (rectangular).
And the for ruins bridge just use this title group.
Finished BridgesRuins Bridge
High Dirt
A Finished Product Utilizing this.
Dirt BridgeCollapse Box
Do Step 1 of the high dirt bridge then apply this cliff terrain to the piece
Step 1You also have to apply the front of the cliff tile at the bottom and top to make it look better (optional).
Step 2make sure the bridge is a little widen compared to the one in the doodad database so that the bottom part can fit better.
Step 3Do step 2 (ruins/high dirt bridge) above then use this title combination.
Finished Dirt Bridges
Post has been edited 26 time(s), last time on Oct 30 2011, 6:31 pm by Tempz.
None.
Normally, there shouldn't be any form of credits in a wiki, but anyways.
Your colors looks unprofessional, which do not meet the wikis' criterias. We could always try to find a work-around, but to me, that shouldn't go into the wiki as it is right now (though the content is great).
Write about personalizing our own bridges. Samsizzle has some skillz in that, ask him a few questions
EDIT:
@sam: how's going the Doodads Placement Tutorial?
None.
I'll be honor'ed if samsizzle would make the collided bridges section
and personalizing bridges section.
Post has been edited 1 time(s), last time on Oct 16 2009, 5:22 pm by Tempz.
None.
@sam: how's going the Doodads Placement Tutorial?
Its good its half way done i havent found any time to finish it though... sorry payne.
I'll be honor'ed if samsizzle would make the collided bridges section
and personalizing bridges section.
I'll try that out.
None.
Payne feel free to re-word anything in my tutorial you find needs to be less vague...
None.
- Re-write tips, they use ugly english
- Side bridges -> Docks
The rest is fine, I think. ;o
None.
For who every wants to take over the thread contact payne, check out the broken bridges on terrain section if you want to make em...
the other broken bridges is using high dirt water blend to a bridge
None.
First you need to get a bridge, right click the doodad and convert it to terrain.
Wow did not know you could do that...thanks lol
None.
You dont need to convert bridges just have "include doodad tiles" selected in the cut/copy/paste options menu.
None.
Really... Really ... Really I mean how much people know about this fourm
None.
Really... Really ... Really I mean how much people know about this fourm
..?
And those colors are awful XD
None.
Collapse Box
0_o Tempz < Payne = Ban Hammer
<- Don't read this Payne
Anywho whats so awful about it
None.
Sleeping wolves wake hungry.
Tempz, this isn't incredibly relevant, but you keep calling tiles 'titles.'
They're two completely different things.
Carry on.
Collapse Box
0_o Tempz < Payne = Ban Hammer
<- Don't read this Payne
Anywho whats so awful about it
Too many colors?
Colors should be used for titles or to highlight specific words in a sentence.
I am mostly talking about this:
http://www.staredit.net/182925/
None.
Damn your HURR >:O I'm keeping my colors
None.